How to quickly and beautifully tie a tie?

Knowing how to tie a tie correctly is important not only for any man, but also for his caring wife, and no matter what method you choose, it will still make a man irresistible.

There are several dozen types of knots that can be used to tie a tie. But in any case, there is one rule - the knot should be tied with care, without damaging the fabric itself with a strong constriction, and in the end it should turn out to be quite tight. The knot should not have folds, this is only allowed in the case of a double Windsor knot, but not in other options.

• Wide

Any man who tries to keep up with modern fashion should be able to choose a tie and tie it with a wide knot, spending only a couple of minutes on it.

1. We turn the tie front side forward, while the end is wider on the right, and narrower on the left. We work only with the wide end.
2. Now you need to cross the wide end with the thin one, placing it (wide) on top.
3. Further, the wide end is inserted from below into the loop around the neck in an upward direction.
4. The active end is wrapped in the same way as after step two.
5. The wide part goes under the narrow one.
6. Lift up the wide part of the tie.
7. She now wraps herself down, passing through the loop on the neck, similar to the fifth step.
8. The active part turns over the narrow one.
9. The wide part passes under the bottom of the neck loop and goes up.
10. The wide part is carried out in a loop that has just turned out.
11. It remains to carefully tighten the knot on the tie and, if there is a crease under the knot, you can straighten it, but this is not necessary. You can adjust the diameter of the loop around the neck by moving the tie knot along its thin part.

• Butterfly

Butterflies are one of the most unique elements of a classic men's suit.

1. The front side is tied around the neck.
2. Now you need to fold the bow tie in half from the right end, to the right side.
3. Then with the left end we go under the center of the part that we just folded and go up.
4. The left part is passed from the top point through the loop on the neck and goes down, it turns out the eyelet.
5. The left part of the tie is folded in half in its wide half and passed into the resulting eyelet, coming in from the left.
6. It remains only to straighten the bow tie on different sides and gently tighten.

• Ascot

These ties are suitable as an informal fashion accessory to complement the men's casual business style.

1. We wrap the neck with a tie not around the collar, but under it, so that the tie touches the skin. The ends of the tie lie on the chest.
2. Some ascot ties come with a ready loop at one end. If you have just one, then stick the other end into it and go to the fourth paragraph.
3. We unbutton the top buttons on the shirt so that it is convenient to work with a tie.
4. One of the ends is 15 cm higher than the other.
5. We throw a long one on a short one.For more stretch, you can wrap the long part around the short one.
6. We tuck the long part under the short one at the very neck, do not tighten it too much.
7. Fully extend the long part and straighten it.
8. We change the location of the tie in such a way that its long part is above the short one.
9. We check that both parts are approximately the same in length. Only one tail will come out of a tie with a loop on the chest.
10. We correct the crease, straighten and smooth the knot near the neck.
11. A beautiful decorative pin is located in the very middle of the knot, and then the knot is more reliable.
12. The ends of the tie can be hidden under a waistcoat or under another type of clothing that will not hide the main touch of the ascot tie - a beautiful wide knot at the very neck.

• School

This method saves you time and is easy to remember.

1. Lay the tie inside out.
2. We put an elastic band across its middle and fasten it with a narrow part of the tie, which is pulled through the bottom of the product for this, and then up through the convenient side.
3. Now slide the same end under the elastic and guide it to the bottom of the tie.
4. It remains to tighten the knot and fasten it from the wrong side using a needle and thread.

• Short

These ties are recommended for men of large build.

1. We wrap the tie around the neck with a narrow part to the right and above the wide part.
2. We direct the wide part of the tie under the narrow one, pointing to the right side, and at the same time turn it over 180, that is, you should see the tie from the inside.
3. Then the wide part of the tie goes over the narrow one to the left.
4. From the bottom, a wide part is pushed through the loop on the neck and goes up. This is done from the wrong side.
5. Further, the same part goes down, through the ear, which has just formed.
6. It remains only to tighten the knot.

• Long

Some men like ties with large oblong knots, which, by the way, are very common among Italians. And this lesson is for them.

1. First of all, we wrap the tie around the neck. The narrow part hangs down on the left and is shorter than the wide part.
2. Now both ends need to be crossed and then with the wide end we wrap the narrow part of the tie twice. The knot will be even larger if you wrap not two times, but three - as you like.
3. In conclusion, skip the wide part up and thread it into the loop that has formed.

• Thick

Here you need to show maximum accuracy, otherwise you can get a short tie and an oversized knot.

1. Throw on the neck inside out. The wide part of the tie is on the left, the narrow part is on the right, its length is just above the navel.
2. The narrow part is superimposed on the wide and stretches down. We pass it right under the collar to the area obtained by crossing.
3. The wide part goes behind the collar, we stretch the tie to the left side.
4. Then we stretch the narrow part to the neck, and the wide part - under the collar to the left side.
5. Again, stretch the narrow part towards the neck.
6. Wide goes under the collar to the right side.
7. The next step is the formation of the front side of the node. To do this, shift the rather narrow part of the accessory from the right side to the left.
8. Then it is threaded from the outside through the loop.
9. The wide part is carefully tightened down.
10. Now straighten the knot and remove unnecessary folds.

• Average

Such a knot looks good on an accessory made of dense and heavy material.

1. First of all, we throw a tie inside out. The narrow part is on the right, above the wide one.
2. We cross both ends, the narrow part is at the top.
3. The wide end goes over the narrow end to the right and is pulled into the loop under the collar from below.
4. Now we direct the wide part into the ear from the outside.
5. Tighten to the desired tightness of the knot.

• with fasteners

The fastener is a traditionally male accessory and serves as a tie attachment to the front of the shirt. Thanks to this fastener, the tie will not swing freely, and its owner will look more neat and elegant.

• On a rope

The lace can be suede or leather, and as a clip, you can use either an ordinary pendant or something from a family heirloom. Any material can be used here.

Specially adapted metal plates are put on the ends of the laces, but sometimes beads are also used to fix them. The classic of the genre is rightfully considered the option created in Texas, when the tie lock is tightened at the level of the first button from the collar.

• On a clip

Clip-on ties are an imitation of ordinary ties. In fact, they are simply fastened with a clip on the collar of the shirt. But such ties have disadvantages.

Firstly, their length is not adjustable, because the knot is fixed. Secondly, it is usually polyester, which means that such a tie is not suitable for a special occasion.

• With a zipper

This is another invention of imitation of a real accessory. The zipper on the tie allows you to wear it without putting it around your neck. A zipper runs along the entire longitudinal axis of the tie and divides it in half, and each of the halves can be fastened to the shirt with a detachable connection.

There is a button on the underside of this accessory, and it forms the process of folding the tie under the knot when it is fastened.This design is able to preserve the traditional appearance of the accessory and comfort when wearing it.

When choosing a tie, pay attention to the fabric from which it is made. A synthetic tie will quickly lose its shape and will not last the first wash.

Choose a tie in width, because it should look harmonious in relation to the lapels on the jacket. The ideal tie size is about 8 cm.

The most popular of all the beautiful and quick ways to tie a tie is the Italian version, it is also called a simple knot in another way (although there are, of course, other options). It does not take much time, and the view is decent and attractive.

1. The tie is tied around the neck, right side out, narrow side to the right and higher than the wide side.
2. The ends are crossed, wide at the top and going to the right.
3. We draw the wide side under the narrow one and to the left.
4. The wide part goes along the top to the right above the narrow one.
5. The wide part goes up to the neck and extends into the resulting ear.
6. Next, the knot must be leveled and tightened.

This is a universal tight knot that fits any collar and always looks elegant.

1. We put on a tie, the narrow part is at the level of the middle of the wide part.
2. We overlap the wide side of the tie on the narrow one.
3. Then we start it under a narrow one.
4. Now we wrap it once around the narrow end.
5. The wide side is passed through the loop under the collar, we get a small loop.
6. The wide part goes from above into this loop and goes down.
7. Tighten the knot carefully.

This knot is suitable for accessories made of thicker fabric.

1. We put a tie on the outside with a seam and cross the ends with a narrow top.
2. Draw the wide part of the tie over the narrow one.
3. We start it by the knot and thread it into the loop between the accessory and the collar.
4. We bring the wide part forward.
5. We draw a wide part under the top layer on the node.
6. Pull out the wide part and tighten the knot.

This design is ideal for long collars.

1. Throw a tie around your neck. Wide part on the left and below.
2. We cross the ends, wide on top, on the right.
3. We carry it under the narrow part and to the left.
4. Now right up.
5. Bottom left again.
6. From the inside, the wide part goes into the loop from below.
7. Goes into the ear.
8. We straighten the knot and tighten it as needed.

With such a knot, you will definitely stand out from the boring crowd.

1. Neck tie, wide part at the height of the future finished accessory.
2. We cross both ends and thread the wide one through the loop.
3. We cross again and close the loop.
4. The thin end goes under the wide end and is threaded through the loop on the other side.
5. Its end is retracted to the right.
6. We direct the narrow part over the wide one, but do not tighten it.
7. The narrow part runs from above, separating the main node and the horizontal segment.
8. The thin part is pulled back and threaded up through the top loop.
9. The narrow end is hidden under the tie.

Suitable for standard collars.

1. The wide end of the tie goes under the narrow, shorter one.
2. The wide part stretches under the narrow one to the right.
3. The front part of the wide side is directed to the left and passed up between the shirt collar.
4. We hold the knot lightly and skip the wide end along the outer part.
5. Pull out the narrow part of the tie and tighten its knot.

A men's suit with a triangle tie always looks elegant and excites the female imagination.

1. Tie on the neck, face up, narrow part on the right and above the left.
2. We cross the ends, they are different in length. Wide end top and right.
3. We stretch the wide end under the narrow one and to the left.
4. We lift the wide part up, and it forms a kind of circle in the knot, from the center of which the narrow part comes out.
5. Again we draw the wide side from the neck from the right side to the left (it is possible and vice versa) and stretch it.
6. The wide side is stretched to the other side and superimposed on the narrow one.
7. Now we do the same, but in a different direction, under the narrow side. The wide part wraps around the narrow one like a snake.
8. Repeat step 6 and get two rings.
9. From the wrong side, from the bottom, we stretch the wide side and point it up, do not tighten it.
10. The wide part is drawn down through the ring and the tie is ready. Tighten the knot and tighten to your liking.

This knot is slightly asymmetric, it is customary to tighten it strongly, which makes it look strict and businesslike.

1. Neck tie, face up, wide on the right, narrow on the left.
2. The end of the small part is slightly above the navel.
3. We cross the ends, the wide part is on top.
4. From left to right, wrap the narrow edge with a wide one.
5. In a horizontal position, you need to shift the wide part from the right side to the left.
6. We repeat - we wrap the wide part again, but lower than the first wrap.
7. We direct the wide part to the neck and pass it under the collar of the tie.
8. We pass through the loop on the front side.
9. We stretch the wide part down and tighten the knot.

You will need an accessory of medium size.

1. We put it on the neck. The narrow part is on the right and higher, the wide on the left and lower.
2. We cross both ends, the wide part is on the right and on top.
3. We direct the wide end to the left, while the narrow end is at the top.
4. The wide part goes from below, passing the left side of the knot, up.
5. The wide part stretches over the narrow one: first to the right, then to the left. This is done from the inside out.
6. The wide part in the middle part of the loop is pulled through the eyelet that has formed.
7. We smooth the tie so as to avoid any distortions, and tighten the knot. The accessory is ready.

This type of knot has one difference from all the others - it is tied not with a wide part of the tie, but with a narrow one.

1. We put on a tie with the front side out, and the seams in. The wide part is on the left side, and the narrow part is on the right.
2. The end of the wide part of the tie is pulled out to approximately the level of the waist or slightly lower. The working part of the tie is narrow.
3. We cross the ends of the tie in such a way that the narrow side is above the wide one.
4. We wrap the wide side of the accessory in the direction from the left side to the right.
5. We stretch the narrow side to the neck and thread it over the collar formed on the tie.
6. We wrap this collar and pull it out to the left.
7. We form the front part of the knot - we horizontally shift the wide part from the left side to the right and thread it under the collar.
8. Now you need to pull the narrow side down and to the left and pass it under the wide part of the tie.
9. We pass the narrow part through the loop on the front side of the knot.
10. We drag the narrow part of the tie to the left side and tighten it a little.
11. We throw the narrow side under the collar, which was formed by moving to the right.
12. We pass the narrow part through the loop on the front side of the tie.
13. We pull the narrow part to the left side and tighten it a little.
14. We straighten the knot and remove all the folds. Ready.

It is beautiful when the tie knot protrudes slightly from under the collar, while the tie is loose, cozy and slightly curving, located on the shirt. This effect is achieved if the tie fits well around the neck, and the knot is pulled up to the very top of the collar.

If you have a light tie and a thin lining, you will not get any decorative folds or dimples. You should not even try to decorate such a tie in this way - the folds will not hold, and the "dimple" can last for several seconds and disappear.

If you are a fan of decorating a tie, then the best option would be to perform it on a printed tie, on which the “dimples” turn out to be both beautiful and fashionable.

For some men, wearing a tie is a real punishment, and they force themselves to do it if the occasion falls out, well, very solemn or responsible. Others go to this feat at the behest of the dress code set at their place of work. And in everyday life, seeing a man in a tie is a rarity. What a thing in the old days: you left the house without a tie - you are not a gentleman.

Modern stylish ties, in which - even for a wedding, combine the usual classics and new trends in men's fashion. And if you put on a stylish tie, then you definitely won’t be left without attention. This year, as before, the tie remains on top among other men's accessories, and will be appropriate everywhere: at a business meeting, at a wedding, and even at a simple party.