How beautiful to lace up shoes - original ways

Until recently, the question of how to lace up shoes almost did not bother anyone. This situation has changed with the advent of bright laces into the fashion world. Such laces undoubtedly attract the attention of others, so this topic has become very relevant today.

Almost daily, we tie our shoelaces in the way we were taught as children. It is this method that everyone will call a classic for themselves. But there are several types of lacing that are considered classic.

To use this type of lacing, you first need to count the number of rows of holes. Shoes with an even number must be laced on the outside, and with an odd number - from the inside of the shoe. The lace must be tucked into the bottom row and the length should be distributed so that the ends are the same. If the ends of the lace at this stage are outside the shoe, then you need to tuck it into the hole in the same way from the outside and vice versa. This will turn out the order of the crosses “from top to bottom”. A knotted lace will last much longer.

First, the lace must be threaded through the bottom holes of the shoe, bring the ends out and distribute the length so that they are equal. Next, the ends need to be crossed and passed through the following holes to the outside of the boot. You need to repeat these steps until the lace fills all the free holes.After that, the remaining ends should be tied into a knot and a bow. Such lacing is great for any type of shoe, it does not crumple the fabric, but evenly distributes it over the surface of the foot.

Sometimes there are situations in which a person cannot devote much time to lacing his shoes, but even at such a moment it is very important to look neat. In order not to fall into the mud with your face, there are several ways to quickly and easily lace up, which will delight you with its originality.

There is such a type of lacing in which you don’t even need to tie a lace on a bow, and the process of creating it will take no more than a minute. At one end of the lace, you need to tie a tight knot, the size of which will be larger than the hole in the shoe. Pass it through one upper hole so that the knot is inside the boot. Thread the other end into the opposite upper hole, inside the shoe, then bring it up through the second hole from the top. Continue threading the string all the way down. Thus, you get two rows: a straight top and an oblique bottom. Pass the free end between the resulting rows to the top, tighten and tuck behind the shaft.

The neatest way to lace up shoes can be called straight lacing. This type is also called internal or hidden lacing, since only neat stripes are visible from the outside, and the weaves of the lace are hidden from view inside the shoe.

This is the simplest type of internal or hidden lacing. The lace must be threaded into the bottom row of holes so that the ends of the lace are inside the boot. One end must be immediately brought out into the upper hole, and the other should be put in a “snake” so that all horizontal lines are outside the boot, and vertical lines are inside.This look is only suitable for shoes with an even number of rows of holes.

This type of hidden lacing looks not only very neat, but quite original. It will require a fairly long cord. First you need to thread the lace into the lower holes so that the ends are outside. Divide the length of the lace into equal parts. Next, you need to fill each end into the hole located above it. Cross the ends inside the shoe and insert them into diagonally opposite holes. The laces come out through the same holes through which they were tucked in. Continue lacing in the same way to the very top. This is a very strong type of lacing, but it is quite difficult to tighten it on the leg.

Sports require special clothing and footwear. Few people know that for the convenience of athletes, there is also a special type of lacing for sneakers and sneakers.

This type of lacing is widespread among the European military. It is very convenient in that the pressure from the tension of the laces falls mainly on the thick fabric around the holes.

The lace must be inserted from the inside of the sneaker outward into the bottom row of holes and distribute the length into equal parts. Then you need to thread each end into the hole above the one from which it was brought out from the top of the boot inward. Next, you need to cross the ends and thread them from the inside out. The ends that are at the top again must be passed inside the sneaker as for the first time. Continue the process to the end of the holes. This type of lacing will appeal to fans of running and other active sports.

This type of lacing is good for cycling because the laces will not cling to the bike and will not get tangled.First of all, the lace must be inserted into the bottom row of holes, so that the ends are outside the sneaker. Pass one end into the hole located above it inward. Then bring this end out from the inside into the hole on the opposite side. The other must be tucked into the hole located above the first end of the lace inside the sneaker. After that, bring it out into the hole from the opposite side. Further, the principle of lacing is simple: if the lace is inside the boot, it must be brought out into the opposite hole; if the lace is outside, it must be threaded through the hole located through one up.

Everyone who wonders about the ways of lacing shoes, seeks to find the most unusual of them. The following are ways for the patient, because such lacing is quite difficult to perform.

This type of lacing is perfect for those who like to tighten their shoes tightly. It will add strength to the laces and extend their life. You should start lacing as a traditional type of lacing, but at the stage of crossing the lace, you need to create an imitation of a knot. Since the lace will not be pulled into a knot, but will be tucked into the following holes, it will be woven into the likeness of one more durable thread.

A very beautiful and very strong type of lacing that looks like a zipper. It is ideal for skates, roller skates and sports shoes. The lace must be threaded into the bottom row of holes and the ends should be distributed so that they are equal. Then skip both ends of the lace from the bottom up under the "bridge" that has turned out inside the boot. Next, you need to cross the laces and tuck into the next row of holes from the inside of the shoe to the outside.Both ends must be threaded under the lace at the hole from which they are released, crossed again and tucked in from the inside of the boot. Repeat these steps to the very top.

Very original type of shoe lacing. In order to lace up the shoes in this way, you need to thread the lace through the lower holes from the inside of the boot, bring the ends out and distribute the length so that the ends are equal. The ends must be crossed, wrapped around one another 2 times so that the spiral comes out and passed through the following holes from the inside of the boot to the outside. Repeat until the lace fills all the free holes. Looks better lacing, made of thick white laces, on dark shoes.

With the help of such lacing, you can significantly decorate the shoes of an adult, and the shoes of a child will become special and unique.

For this method, you will need two pairs of identical laces, but in different colors, for example: white and black. First of all, you need to take one white and one black lace and sew them in such a way that there is not too thick a layer or knot. To do this, it is better to cut off the caps on one side of each lace so that they do not rub the leg. The finished two-color lace must be inserted into the boot so that the junction of colors is hidden. You can lace up in any known way.

For this method, you will need two laces for each boot. Insert the first one into the bottom holes from the inside of the boot to the outside and distribute the ends so that they are equal. The same must be repeated with the second, but it must be inserted into the second row from the bottom. Cross the first one and pass it into the third row of holes from the bottom from the inside of the shoe to the outside. Thread the second lace in the same way into the next free row.At the top you get four free ends for lacing. Here you can show your imagination: tie two bows horizontally or vertically, or tie one bow from all ends.

This look is only suitable for shoes with a wide lacing field. It is better to choose flat and dense laces. The first lace should be threaded in a simple straight way. The second - you need to thread it vertically, passing alternately under and over the dark row. This is a very original way, but very impractical. It is quite difficult to lace up shoes in this way, it takes a lot of time, in addition, the pattern is deformed every time you take it off or put it on.

“Everything ingenious is simple” - this saying is very suitable for the next method of lacing shoes. For her, you will need two pairs of flat colored laces. It is enough to put one lace on another and lace it up in any known way. When choosing laces, you should opt for thinner and flatter ones. Thick laces will create a tight layer, will be difficult to thread through the holes and do not hold well in the knot.

Any laces are suitable for this type of lacing, but round ones will look the most original. Laces of different colors must be sewn and threaded into the bottom row of holes so that the junction of colors is exactly in the middle. Then continue lacing as in the case of the traditional one, but each crossing twist the laces once so that the ends return to the direction from which they come. This type of lacing is not practical, as the pattern shifts.

When choosing a new pair of shoes, we want them to be comfortable. In lace-up shoes, it is the lace that plays an important role, because if it is tied incorrectly, it can spoil the feeling of wearing even the best pair.

The choice of the type of lacing should be approached as the choice of outfit: sports shoes involve the use of lacing for sports, and smart shoes are complex and unusual.

1. The lace should be easy to loosen and tighten.

2. The ends should not be too long.

3. Lacing should evenly distribute the tension of the lace along its entire height.

Under these criteria, classic types of lacing are best suited.